Surface preparation is the key to coating performance.
CHLOR*RID can satisfy your most aggressive requirements – simply, safely and economically. It is effective on most surfaces, including steel, foam, concrete, and plastics.
CHLOR*RID has been used by private industry, for federal and state highway coating and cleaning projects, to wash concrete dams, tanks, bridges, and machinery, even in a microbiological lab.
When your specification requirements requires consistent, safe and reliable removal of soluble salt contamination, use CHLOR*RID.
SOLUBLE SALT TESTING AND REMOVAL
CHLOR*RID® Salt Remover
World-Leading Soluble Salt Remover
- Compatible with all coatings
- Apply through UHP pressure equipment
- Dilute with potable water
- Economical: Pennies per square foot
- No rinse required
- No Residue
- Vapor/Mist blasting
- Bio-degradable
- Non-hazardous
- No VOC’s
CHLOR*RID® will not interfere with the adhesion of protective coatings & linings.
CHLOR*RID DTS™ (Direct to Surface)
The electrochemical bonding of soluble salts to substrates defies all but the most forceful removal attempts. While a number of methods are used, surface-attached soluble salts are nearly impossible to remove. When non-visible soluble salts remain, your surface preparation will not prevent early coating failure. Is this risk worth taking?
With its patented organic bonding chemistry, CHLOR*RID stands in a class of its own as the surest, safest, most cost-effective way to remove soluble salt contamination. CHLOR*RID strips chlorides and sulfates from industrial surfaces by ionization energy. Your surfaces are prepared…and so are you!
HOLD*BLAST™ Surface Passivator
World-Leading Soluble Salt Remover
- Compatible with all coatings
- Cost Effective
HOLD*BLAST costs only pennies per square foot. - Dilute with potable water
No need for high cost deionized or high purity water. - Vapor/Mist blasting
Use a 1:50 dilution, depending on the quality of water, a higher dilution may be possible. - Apply through UHP pressure equipment
- No VOCs
- Non-hazardous
- Bio-degradable
HOLD*BLAST™ does not leave a film or residue to interfere with a coating.
CHLOR*RID™ SP8 Gel
Benefits
- Easy to use
- Field applied pickling agent
- Removes flash rust
- Not an inhibitor and does not leave a film
- Improve coating adhesion up to 66%
- Eliminate weather delays
- Reduce carbon footprint
- Biodegradable & easy to ship worldwide
- Reduce project costs up to 40%
- Save time on unnecessary rework
- Significantly extend coating service life
CHLOR*RID™ SP8 Rinse
Benefits
- Easy to use
- Prevents flash rust
- Not an inhibitor and does not leave a film
- Improve coating adhesion up to 66%
- Fast-drying
- Completely evaporates
- Non-flammable
- Water-based
- Non-toxic
- Eco-friendly, biodegradable, & easy to ship worldwide
CHLOR*TEST™
REVOLUTIONIZING THE INDUSTRY
Field testing for chlorides by both qualitative and quantitative methods is common and the threshold for acceptable levels is dropping, but the cumbersome methods for testing have remained the same – until now!
CHLOR*TEST – the accurate way to perform chloride field testing – revolutionizing the industry
CHLOR*TEST is so complete and easy to use that even the least experienced inspector can get accurate results. Imagine, a field test that is easy to use, yet more reliable than any other method of testing.
CHLOR*TEST was developed for ease of use and to prevent outside and cross contamination. The components are premeasured to ensure accurate results in parts per million and micrograms per square centimeter. In addition, no temperature correction is needed for 41 deg. F to 176 deg. F. Field test inspectors around the world use this innovative product with confidence on virtually any surface at any angle.
The CHLOR*TEST uses a unique patented extract solution, CHLOR*EXTRACT™, to retrieve surface chloride contamination. In the field, this special extract enhances retrieval rates, thereby increasing accuracy. The greater the retrieval rate, the more accurate the test results.
When specifications require consistent, safe and reliable test results for chloride contamination, use CHLOR*TEST. Each kit contains five (5) individual tests. CHLOR*TEST is designed to be used on vertical, horizontal or overhead surfaces.